Preventive Maintenance Plans
Scheduled maintenance prevents most emergency breakdowns, keeps you inspection-ready and extends equipment life.
Basic
2 visits / year
- Coil cleaning, filters, gaskets, drains
- Temperature log & report
- 10% off repairs
Standard
4 visits / year
- Everything in Basic
- Priority scheduling
- Diagnostic fee waived
- 15% off repairs
Premium
Monthly or bi-monthly
- Ice machine sanitizing included
- Fastest emergency response
- 20% off repairs
Recommended maintenance schedule
Manufacturers' manuals require regular cleaning; skipped maintenance is the #1 cause of breakdowns (and can affect warranty).
Ice machines
| Interval | Task |
|---|---|
| Daily | Check ice quality and production; keep scoop out of the bin |
| Monthly | Clean air-cooled condenser (Follett manuals call for monthly condenser cleaning) |
| Every 6 months (minimum) | Full clean, descale and sanitize; replace water filter; check water flow, ice thickness, bin control |
| Every 6–12 months | Inspect evaporator, water pump, distribution tube, float/probes, drain lines; check refrigerant performance |
| Hard water, bakeries (yeast) and bars may need cleaning every 3 months. |
Reach-in refrigerators, freezers & prep tables
| Interval | Task |
|---|---|
| Daily | Log temperatures; keep doors closed; don't overload air vents |
| Weekly | Clean door gaskets; wipe prep rail pans; check lid closes fully |
| Monthly | Clean condenser coil / filter (kitchens with grease: monthly; others quarterly) |
| Quarterly | Check door gaskets/hinges, drain lines and pans, evaporator fan, defrost operation, probe accuracy |
| Yearly | Full electrical check, amp draw, refrigerant performance |
Walk-in coolers & freezers
| Interval | Task |
|---|---|
| Daily | Temperature log; keep door clear; check for ice on floor/ceiling |
| Monthly | Inspect door gasket, sweep, door closer, heater wire (freezers) |
| Quarterly | Clean evaporator coil and drain pan; check drain line heater (freezers); clean condensing unit coil; check fan motors |
| Semi-annual | Defrost timer/controller settings, superheat/subcool, pressures, electrical connections, contactor |
Bar / bottle coolers & merchandisers
Monthly: clean condenser (bar lint & dust). Quarterly: gaskets, fans, door heaters, lights.
Commercial dishwashers
| Interval | Task |
|---|---|
| Daily | Drain and clean tank, scrap screens, wash and rinse arms; check chemical levels |
| Weekly | Check rinse temperature / sanitizer level; inspect curtains (conveyors) |
| Monthly (or per water hardness) | Delime machine and booster |
| Quarterly | Inspect pumps, seals, gaskets, heating elements, fill and drain valves, chemical pumps |
Fryers
| Interval | Task |
|---|---|
| Daily | Filter oil; clean crumbs; check oil level |
| Weekly | Boil-out the frypot; inspect drain valve |
| Monthly | Clean flue/burners (gas); check filter pump and pads |
| Quarterly / semi-annual | Calibrate thermostat/probe; test high limit; check gas pressure and ignition; inspect elements (electric) |
Ovens & combi ovens
| Interval | Task |
|---|---|
| Daily | Clean cavity; combi: run cleaning program (CleanJet etc.) |
| Weekly | Check door gaskets; clean fan guard and air nozzles (rapid-cook) |
| Monthly | Clean air filters; check fan motor; descale steam generator per water hardness |
| Semi-annual | Calibrate temperature; inspect ignition/burners, elements, door hinges; combi: check water treatment |
Commercial washers & dryers
| Interval | Task |
|---|---|
| Daily (dryers) | Clean lint screens |
| Weekly | Clean door gaskets/boots (washers); check for leaks; clear coin mechanisms |
| Monthly | Clean lint chambers; inspect drain valves; check belts |
| Quarterly | Inspect exhaust ducting (fire risk), gas burners, bearings, shocks, door locks |
| Yearly | Full exhaust cleaning to the roof/wall cap; electrical and gas checks |
What a PM visit from us includes (copy for site)
- Inspection checklist and written report with photos
- Coil cleaning, filter changes, gasket check, drain cleaning
- Temperature, amp-draw and pressure readings
- Early detection of worn parts before they fail
- Priority scheduling and repair discounts for plan members
Want a plan for your location? Request a quote