Commercial Ice Machine Repair in Charlotte, NC
When the ice machine stops, the bar, the drink station and the seafood display stop with it. We repair modular cubers, undercounter units, flakers and nugget machines on site — usually the same day — and we clean, descale and sanitize them so they keep producing clear, full-size ice.

What we fix
- Not making ice or low production
- Long freeze / long harvest errors (E01, E02, 3 beeps, Error 1)
- Thin, cloudy or hollow cubes
- Water leaking into the bin or onto the floor
- Water pumps, inlet valves, hot gas valves, float switches, ice thickness probes, control boards
- Compressor, condenser fan and refrigerant leak repair (EPA-certified)
- Scheduled cleaning & sanitizing every 6 months or sooner
How a service call works
- Call or send the form — tell us the brand, model and any error code.
- We confirm a time window, same day whenever possible.
- The technician diagnoses the unit and gives you a written estimate.
- You approve; we repair on the spot or return with the part.
- You get a service report with temperatures and parts used.
Request service
Common problems we fix
| Symptom | Usual causes we check |
|---|---|
| Not making ice / low production | Dirty condenser coil or failed condenser fan; hot ambient (>90°F) or poor clearance; low/no water supply, clogged filter; scale on evaporator; failed water pump; refrigerant leak / weak compressor; bin control stuck 'full'. |
| Long freeze cycle (E01 / 3 beeps / Error 1) | Condenser airflow, water inlet valve leaking into sump, hot gas valve leaking by, TXV, low charge, float switch, dirty evaporator. |
| Ice won't release / long harvest | Scale on evaporator (clean & descale), hot gas valve not opening, harvest assist, curtain switch, machine not level, thermistor. |
| Small, cloudy, hollow or incomplete cubes | Low water flow, clogged distribution tube, dirty machine, wrong ice thickness probe setting, machine not level, low water pressure. |
| Water leaking | Clogged/obstructed drain, cracked water trough, bad float, distribution tube off, bin drain blocked. |
| Machine runs but bin overflows | Bin control/thermostat or bin level probe failed, curtain switch stuck. |
| Slime / mold / odor | Missed cleaning schedule; run clean + sanitize, replace filter, check air quality (yeast near bakeries/bars). |
Brands we service
Error codes for this equipment
Look up what the display is telling you:
Manitowoc
E01 E02 E03 E04 E05 E07 E08 E09 E10 E11 E12 E15 E16 E19 E20 E21 E22 E23 E24 E25 E26 E27 E28 E29 E30 E31 E32 E33 E34
Scotsman
1 2 3 4 5 7 8 F / F flashing H b C L d O E 1 2 3 4 E Water light on Water light blinks 2x Refrigeration light on Refrigeration blinks 1x Refrigeration blinks 2x Refrigeration blinks 3x Refrigeration + water lights (running)
Hoshizaki
1 beep 2 beeps 3 beeps 4 / 5 beeps (older mech. bin control) 6 beeps 7 beeps
Ice-O-Matic
Error 1 Error 2 Error 3 Error 4 Error 5 Error 6 Error 7
Follett
Serving the Charlotte area
Commercial Ice Machine Repair in Charlotte, Concord, Gastonia, Huntersville, Matthews, Mint Hill, Cornelius, Davidson, Mooresville, Kannapolis, Harrisburg, Monroe, Indian Trail, Pineville, Belmont, Mount Holly, Fort Mill, SC, Rock Hill, SC, Tega Cay, SC, Lake Wylie, SC.








