Commercial Oven Repair in Charlotte, NC
We repair gas and electric convection ovens, combi ovens, rapid-cook ovens, pizza and conveyor ovens. Most no-heat problems come down to an igniter, a probe, a contactor or a fan motor — parts we carry.

What we fix
- Oven not heating or slow to heat
- Uneven baking / convection fan problems
- Temperature calibration
- Combi steam generator, CleanJet and water-treatment faults
- TurboChef F-codes, Rational Service codes
- Door gaskets, hinges and glass
How a service call works
- Call or send the form — tell us the brand, model and any error code.
- We confirm a time window, same day whenever possible.
- The technician diagnoses the unit and gives you a written estimate.
- You approve; we repair on the spot or return with the part.
- You get a service report with temperatures and parts used.
Request service
Common problems we fix
| Symptom | Usual causes we check |
|---|---|
| Not heating | Gas: igniter, flame sensor, gas valve, ignition module, gas pressure. Electric: element, contactor, high limit tripped. Both: temperature probe, control board. |
| Uneven cooking / hot spots | Convection fan motor slow or failed, fan blade loose, door gasket leaking, wrong rack loading, failed element bank. |
| Temperature off from setpoint | Probe out of calibration, thermostat calibration, door seal, control board. |
| Convection fan won't run | Door switch, fan motor, motor capacitor, inverter (variable-speed models), relay. |
| Combi: no steam / low humidity | Scale in steam generator, water supply, solenoid, level electrode, water too pure (RO) or too hard. |
| Combi: CleanJet / cleaning faults | Low water pressure, clogged nozzle, care pump, drain valve. |
| Rapid-cook: F2 low cook temp | Clogged air nozzles/catalyst, door seal, heater, blower, low voltage. |
| Door won't close / glass condensation | Hinge, latch, door gasket, door adjustment. |
Brands we service
Error codes for this equipment
Look up what the display is telling you:
Rational
Service 10 Service 11 / 12 Service 13 / 14 Service 17–19 Service 20.x Service 23 / 24 Service 25 Service 26 / 27 Service 28 Service 29 Service 30 Service 31.x Service 32 / 33 Service 34.x Service 36 / 37 Service 40–44 Service 100 / 120
TurboChef
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F12
Blodgett
Cavity Probe Error Cavity High Temp Error Cooling Fan / Quench Probe Error Fan Error Com Error High Temp Error
Serving the Charlotte area
Commercial Oven Repair in Charlotte, Concord, Gastonia, Huntersville, Matthews, Mint Hill, Cornelius, Davidson, Mooresville, Kannapolis, Harrisburg, Monroe, Indian Trail, Pineville, Belmont, Mount Holly, Fort Mill, SC, Rock Hill, SC, Tega Cay, SC, Lake Wylie, SC.














