Commercial Fryer Repair in Charlotte, NC
A down fryer means half the menu is down. We repair gas and electric open fryers and pressure fryers, built-in filtration systems and the computer controllers that run them.

What we fix
- Fryer won't heat / pilot won't stay lit
- Oil overheating or high-limit tripping
- Slow recovery
- Built-in filtration pumps, drain and return valves
- Frymaster E-codes, Henny Penny E-codes, Pitco alarms
- Thermostat and probe calibration
How a service call works
- Call or send the form — tell us the brand, model and any error code.
- We confirm a time window, same day whenever possible.
- The technician diagnoses the unit and gives you a written estimate.
- You approve; we repair on the spot or return with the part.
- You get a service report with temperatures and parts used.
Request service
Common problems we fix
| Symptom | Usual causes we check |
|---|---|
| Won't heat | Gas: pilot out, thermocouple, gas valve, igniter, ignition module. Electric: element, contactor. Both: high limit tripped, drain valve open (interlock), probe. |
| Oil overheating / high limit trips (E-5, HOT, Hi) | Probe out of calibration, thermostat stuck, gas valve stuck open, contactor welded. |
| Slow recovery (E25/E26) | Weak burner or element, low gas pressure, dirty burner/flue, failing probe. |
| Pilot won't stay lit | Thermocouple or thermopile, dirty pilot orifice, draft, gas valve. |
| Filtration problems (E09, pump won't fill) | Dirty filter pad, pump motor tripped, filter pan not seated, clogged lines, return/drain valve actuators. |
| Oil leaking | Drain valve seal, cracked frypot, high-limit or probe fittings, filter lines. |
| Pressure fryer won't build pressure | Lid gasket, deadweight valve, solenoid, lid not latched. |
Brands we service
Error codes for this equipment
Look up what the display is telling you:
Frymaster
E01 / E02 E03 E04 E05 E06 E07 / E08 E09 E10 / E11 E12 / E13 E14 E15 E16 / E17 E19 E20 E21 E22 E23 E24 E25 / E26 E27 / E28 PROB HOT HELP CALL TECH
Pitco
Heat feedback flashes 7x Heat feedback flashes 3x Drn / DRAINING TURN OFF Prob / PROBE OPEN Hi / HIGH TMP Ignition Failure / HEAT FAILURE SYSTEM FAILURE LoC
Henny Penny
Serving the Charlotte area
Commercial Fryer Repair in Charlotte, Concord, Gastonia, Huntersville, Matthews, Mint Hill, Cornelius, Davidson, Mooresville, Kannapolis, Harrisburg, Monroe, Indian Trail, Pineville, Belmont, Mount Holly, Fort Mill, SC, Rock Hill, SC, Tega Cay, SC, Lake Wylie, SC.







